Advanced Communication Systems, Inc | Call Us 760-781-3131
Advanced Communication Systems, Inc | 760-781-3131

Comparing Products



Product Summary

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace - whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.

Features:

  • Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2)
  • Any combination of two digital protocols may be selected from NXDN, DMR, and P25
  • Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
  • Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses
  • Easy to follow GUI for at-a-glance operational status and Multi-line Text to convey information
  • 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control
  • Built-In GPS Receiver/Antenna for effective fleet management
  • Bluetooth® Module Built-in for hands-free operation
  • Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
  • Built-in 56-bit DES Encryption
  • Optional 256-bit AES Encryption
  • Built-in Motion Sensor for man down detection
  • microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data""
  • IP67/68 and MIL-STD-810 C/D/E/F/G
  • 6 W (136-174 MHz ) Models
  • 5 W (380-470, 450-520 MHz) Models
  • 3 W (700/800 MHz) Models
  • Full Key Models (w/numeric keypad) and Standard Key Models (w/o numeric keypad)
  • Maximum of 1024 CH, 128 Zones (4000 Ch. Opt)
  • 1 W Speaker Audio




Product Summary

The KCH-21R ia a speaker microphone with a full-featured control head, which enables one-hand operation of PTT, volume and channel selection. Designed to be used with the KENWOOD NEXEDGE® NX-5000 Series mobiles, the control head's large, bright 1.74" LCD display makes it easy to do at-a-glance status checks. The 14-character full-color display has 5 lines for customizable menus and icons and the 7-color LED display at the top of the unit can be used for quick visual alerts, even in low light and high noise environments. The KCH-21R has built-in Bluetooth® with HSP (headset) and SPP (serial port) profiles and a powerful built-in speaker with 1W output, supported by active noise reduction.

The KCH-21R was designed in collaboration with our fire service and police customers who asked us for easy, intuitive one-hand operation. Our public safety customers also wanted to be able to remotely control multiple NX-5000 Series RF decks, which many of our customers use in their vehicles to enable full tri-band receive and transmit.

FEATURE HIGHLIGHTS

  • Speaker microphone with full-featured control head
  • Handheld design offers one-handed operation of PTT, volume and channel selection
  • Designed to work with the NX-5000 Series mobile radios using Control Head Remote Kit
  • Intuitive operation similar to that of the KCH-19 and KCH-20R control heads

AUDIO FEATURES

  • Built-in speaker with 1 W output
  • Active noise reduction for a single microphone enabled by DSP on the radio
  • 3.5mm-diameter earphone jack on the bottom

DISPLAY FEATURES

  • Large 1.74-inch TFT/transflective LCD for at-a-glance operational status checking
  • Intuitive GUI - 14-character full-color display with 5 lines for menus and icons
  • 7-color programmable LED located at the top for easy recognition

OTHER FEATURES

  • Multi-head/Multi-deck Configuration
  • Built-in Bluetooth® with HSP (headset) and SPP (serial port) profiles
  • Data interface for radio programming, keyloading and data I/O
  • Optional adapter for the RF Deck (KRK-15BM Control Head Remote Kit) is required
  • for connection to the mobile radio

MULTIPLE REMOTE CONTROL HEAD CONFIGURATION

  • Intuitive graphical UI is used even for the selection of multiple RF decks.
  • Dual Remote Control Heads x Multi RF Decks
  • Dual Remote Control Heads x Single RF Deck


Kenwood Products